Make sure the arms of the gun are open and install the nut on the mandrel. Also, select the appropriate mandrel to fit the gun head. For this purpose, the rivet should be turned in the clockwise direction and should be continued until the bottom of the holding nut of the tool is completely intact with the flared head of the nut. Step 2: Rivet Nut ThreadingĪfter inspecting the tool, the threading of rivet nut into the mandrel is required. The installation of rivet nut tool is easy when the below-mentioned steps are followed: Step 1: Inspection of the Toolīefore the actual process of installation is started the thread of the mandrel and rivet nut should be inspected to make sure all parts are intact. But some installation techniques should be learned on how to install the Qfun rivet nut tool, and these are highlighted in the following article. However, this hassle is not necessary when the rivet nut tool can easily be used to install the rivet nuts. But still, a larger bushing or washer is also required so that it can tightly fit around the bolt. Oh, and you know, rivet nuts and rivet nut tool.Working with rivet nuts without tools is challenging, as then it will require you to have a bolt that must have its own nut and must fit into the rivet nut. The Cal Unit so you know the pulling force, the calipers to make sure measurements are to spec, Rivet Nut Catalog to see specs of the part you’re installing, hex tool to change the pressure of the tool, and vice grips to change the mandrel of the Cal Unit. The last two items are pretty obvious, but the others are really necessary to ensure a perfect installations. There are a variety of fastener installation systems you can use, but preferably it would be a hydro-pneumatic tool as it offers fast installation with the ability to spin the part onto the mandrel itself.Ĭan’t install rivet nuts without… rivet nuts! It goes without saying, you need rivet nut tools to install rivet nuts. Vice Grips are used to install the headset on the Hand Tool Calibration Unit and change the headset on your tooling. By using the Hand Tool Calibration Unit to check the pressure, you’ll know whether to turn the pressure up or down on your rivet nut tool. Hex tool is used to increase or decrease the pressure on your hydro-pneumatic rivet nut tool. It’s a valuable reference to make sure you’re installing the correct part. Everything from grip range, installation length, hole size, part number nomenclature and more. ![]() The rivet nut catalog has loads of information the user may need during their installations. They help ensure the part was installed correctly too. This could be the measurement of the hole, or the installed length of the rivet nut. Calipers are used to measure the dimension and length of an object. A dip in pulling force may set the part improperly, leading to rework and time spent fixing parts the user already installed.Įvery fastener installer needs calipers at their workstation. The Hand Tool Calibration Unit shows the pulling force of the rivet nut installation tool, so users know the exact installation force being used to install the part. Unless you’re installing parts with a process monitoring tool, you need a Hand Tool Calibration Unit. ![]() Let’s take a look at what every rivet nut installer should have at his or her rivet nut workstation: What do you need to be successful at installing rivet nuts? Depends who you ask.įor some, it’s just parts and a rivet nut tool.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |